Watch Out: How Double Glazing Window Locks Repairs Is Taking Over And How To Respond

· 6 min read
Watch Out: How Double Glazing Window Locks Repairs Is Taking Over And How To Respond

Double Glazing Window Locks Repairs

Repairing double glazing window locks is vital to ensure the security of your home. A damaged hinge or handle could let draughts in to your home and leave your windows vulnerable to burglars.

Fortunately, you can repair the stiffness of uPVC handles or locks without having to replace your door or window. Simply cooling or oiling the mechanisms can help to solve any issues.

Broken Glass

Over time, double glazing window locks can wear down. The handles can become difficult to open or lock shut. This can cause issues with air circulation in the home and could also pose an security risk. In order to rectify this issue, it's essential to fix the window in the shortest time possible.

Double-glazed windows consist of three or two panes of glass that have a gas in between to provide insulation as well as an air seal to keep the panes together. If you notice condensation between the glass panes it is likely that one of these seals requires replacement. This usually involves replacing only one pane of glass, which is much cheaper than replacing the entire glass window.

A blow-up seal in windows with double glazing usually results in condensation and cloudiness. This could be caused by a variety of factors, including air leaks, or the presence of humidity in the home. As soon as you notice the issue, you need to contact a double glazing expert to replace the gas seal and seal on your double-glazed windows.

It is possible to replace a single pane of double glazing glass, but it is not recommended to do so without the help of a professional. This is due to the fact that it requires special tools and expertise to do the job safely. Doing it yourself could cause damage to the frame of the window or even to your health.

A lot of people use a crowbar to try and open their double glazed window when it's stuck, however, this can leave the window frame damaged and swollen. A window specialist will be able to remove the handle and open the window without causing further damage. They can also convert old window mechanisms into modern ones.

Window hinges are prone to becoming stiff and difficult to open after a while especially when they are located in an area that is noisy. It is important to regularly grease the hinges of your windows with silicone spray. Do not close the window using the handles or by closing it heavily. This could damage the hinges.

Broken Sash

This is a common problem with older double-glazed windows. If the upper sash has been ripped out of its pocket, it may be difficult to secure it and open the window. This usually happens because pins have disengaged, or a balance shoe is been disconnected. It's important to understand how your sash is configured before you attempt to repair it.

This can be solved by removing the sash, and then cleaning it thoroughly. This will reveal whether it's still a good fit. If not, you can add stoppers for the sash to secure it. You can purchase them from most hardware stores or online. After cleaning the sash, you can replace the parting beads and lubricate the pulley axles by using Teflon or silicon spray. It's a good idea label the weights prior to when you take them off so that you can put them back in the correct way.

A damaged handle is another common problem. It can be difficult to tell if your windows handle is damaged, but there are a few signs. If the handle feels stiff or clunky, or if it doesn't feel secure, it is likely damaged.

This could be because of the simple fact that it's not being used or use, but it's possible that the handle has cracked or become detached. In certain cases, the handle could be damaged internally and cannot be replaced. However, it's worthwhile to try to resolve the issue as soon as is possible.

It may be necessary to take off the hinges that connect the window sash to the frame to remove it. This can be a challenging job, so it's crucial to have someone with you to hold the sash in place and ensure it is steady. After removing the hinges it is essential to clean them and the surrounding areas. Reattaching the hinges is also an excellent idea. You can test the handle and verify if it is working correctly. If it's not working, you should consider replacing it. This will ensure that your window is as secure as can be.

Broken Handle

It's not unusual for window handles to break or weaken over time. It's important to repair any damaged handles as quickly as possible to avoid security and functionality issues.

Fortunately window handles are relatively easy to replace. The window handle can be easily replaced by anyone with a few DIY skills. In contrast to the sash, which is secured with multiple bolts, a window handle only requires two screws. Once the new handle has been put in place, it's important to test it in order to ensure the mechanisms are functioning correctly. This includes locking the handle and checking for gaps that might allow drafts to be able to enter your home, or allow burglars to gain access.

The most common reason for a damaged window handle is that it's simply worn down from repeated use. A damaged handle could also be the result of excessive stress or force. If you force a window to open, it may add additional stress to the handle. This increases the chance of injury.

Other reasons for a broken hand could be due to poor maintenance and aging or design problems. The handle may wear out prematurely due to an absence of regular cleaning and oiling. This is often caused by dirt or debris that have accumulated over time. Additionally,  double glazing window repairs  can be damaged by improper installation and alignment problems.

If the solutions mentioned above aren't working If the fixes mentioned above don't work, the Tasker will require access and remove the lock itself. This may involve taking the frame off or breaking out the existing window frame and plastic bead (to give the Tasker more room to maneuver). The new lock will then be installed to match the shape of the uPVC handle. The new handle will be put back on and the procedure is complete. Tasker will provide you with an estimate of the cost of repair in the event of this happening.

A faulty Lock

It's important that you fix any broken window locks as soon as you can. A broken window can cause drafts, weaken security barriers and make your home more vulnerable to burglary. Window lock repairs are usually small, but it's better to call a professional before the problem becomes more severe and costs you more money.

UPVC window handles come in two styles that include cockspur handles and espagnolette handles. The first uses a central rod that operates the locking cams, which are shaped like mushrooms, that secure into window frame keepers. The latter comes with an attached handle to a spindle. It protrudes into the rod to activate the lock's locking cams that look like mushrooms, also known as locking mushrooms. The latch of the lock then clips into a window frame's mortise and catches.

Both kinds of UPVC windows locks are at risk to damage, especially in older homes. This can happen when the sash becomes warped or misaligned, and it might even fall off. In these instances, the lock needs to be re-installed to prevent draughts as well as loss of efficiency. Tasker can repair the damaged lock for you, providing you with peace of mind that your windows are safe from intruders.



The first thing a Tasker does to repair your double glazing window lock is to examine it and identify the problem. Once they have all the data they require, they'll prepare their tools and then arrive at your home. They will usually bring along a Phillips head screwdriver and needle nose pliers, wood glue and fine-grit papers.

If the sash has been misaligned the Tasker will have to loosen the screws that hold both parts of the lock to the window frame. They'll then remove the latch and then fill the mounting holes with wood putty (if applicable) and sand the area until it's flush with the frame of the window.

If the lock is rusted they'll clean it using wire brush or oil and then lubricate it with grease to keep it working smoothly. They'll also make sure that the latch is in good condition and replace it.